石家庄阳光棚厂家之安装要求

1、深化设计：阳光棚制作前乙方须根据园林景观图纸的所示阳光棚造型与颜 色进行二次设计，设计方案需经过设计及甲方的认可后方可加工制作。
　　1，deepening Design: Before sun roof B shall be made ??in accordance with sun roof as shown in the second design the shape and color landscape drawings, designs subject to approval behind the design and production of processed Party.
　　2、连接方式：阳光棚主梁立柱与已完工结构挡土墙采用200*160*12钢板预埋 铁，M16*190化学锚栓链接，龙骨铺设**横平竖直，保证与阳光板接触面积平滑，使阳光板扣压严实牢固。
　　2, Connection: sun roof girder structure column and retaining walls have been completed using 200 * 160 * 12 steel embedded iron, M16 * 190 chemical anchor links, keel laying must be smooth vertical and horizontal, to ensure the smooth area in contact with the solar panels make solar panels withhold tight firm.
　　3、焊接打磨：接缝满焊，打磨抛光；焊缝≥5㎜，焊缝均匀平滑，无明显暇疵。 无虚焊、漏焊、堆焊，焊口打磨平整，光滑无毛刺。
　　3, welding sanding: full seam welding, grinding and polishing; ≥5㎜ welds, weld uniform and smooth, no obvious flaws. No Weld, weld, welding, weld polished smooth, smooth burr.
　　4、表面处理：金属表面成形前须打沙除锈做防锈漆一道，成形焊接后焊点清理后涂防锈漆一道，面漆一道（颜色由业主定）
　　4, surface treatment: the metal surface to be playing before forming a sand blasting do rust, welding joints after cleaning up after forming a painted rust, paint a (color given by the owner)
　　5、固定阳光板的铝合金扣条**穿防水胶条。
　　5, the fixed solar panels of aluminum buckle must wear waterproof tape.
　　6、压条用玻璃胶固定在扣条上，两侧打玻璃胶密封。
　　6, layering plastic buckle fixed glass strips on both sides of the plastic glass seal.
　　7、打玻璃胶要求胶缝饱满均匀，平整光滑，不能透气渗水。
　　7, plastic glass glue joints require full uniform, smooth, not breathable water seepage.